Views: 46 Author: Site Editor Publish Time: 2022-11-14 Origin: Site
The door lock cylinder is the main part that controls the opening of the lock and the heart of the lock. When ordering a lock, you most likely need to specify the type of cylinder you want. The list of options is long: mortise lock, edge, knob key, lever key, latch and profile.
How is the door lock cylinder serviced?
What are the steps to replace the door lock cylinder?
What does the door lock cylinder contain?
Sometimes the door leaf sinks due to the gravity of the door leaf itself or the door leaf, and the door is locked or the door is not opened smoothly. At this time, it is often difficult to open and lock the door with a key. Do not twist the key violently at this time, so as not to break the key and increase the problems.
The right solution: You should first check the cause of the door lock cylinder. If the loose leaf causes the door leaf to sink, the loose leaf should be fixed with screws. If the door frame is deformed or the ground is irreversible, you can start with the door frame and expand the trap of the door lock cylinder accordingly, so that the door lock can be opened and closed smoothly.
Loosen the two screws at the top and bottom of the handle plate;
Loosen the screws on both sides of the lock cylinder sleeve;
Remove the anti-theft cover of the lock cylinder;
Remove the old lock cylinder;
Install the anti-theft shell of the lock cylinder, and then install the handle.
Attach the inner and outer handle and close it. The outer handle should be pressed by someone.
Adjust the inner and outer handles, the screw holes should be aligned with the nut there, and the screw should be rotated after the light is aligned;
Insert the screws and tighten them.
Cylinder
The lock cylinder (or cylinder) is the body of the door lock cylinder into which you insert the key and adjust the pin before entering or removing the lock. When you open your front door, turn the key in the lock cylinder. The cylinder contains a series of pins that are moved into place by keys specific to that particular cylinder. If you hear someone "encrypting" instead of replacing the lock, it only means that they reset the pin in the cylinder instead of replacing the entire lock.
Indications that the locking cylinder needs to be replaced:
Blocking or difficulty turning the cylinder with the right key
A key has broken off in the cylinder
Zhejiang Yige Technology Co., Ltd. is located in the state-level economic development zone, Binhai District, Wenzhou City. It had a factory hall of over 10000 square meters with a total investment of 1.42 million US dollars, a unique cultural and economic environment and unlimited business opportunities for the development of the company.
