English

Bahasa indonesia
Tiếng Việt
한국어
Deutsch
Português
Español
Pусский
Français
简体中文
BLOGS
Home » Blogs » Industry News » How can we use the the door lock cylinder?

How can we use the the door lock cylinder?

Publish Time: 2022-11-09     Origin: Site

In the decoration of the house, every room must be equipped with a door. Doors with door locks can better protect privacy and security. There are many door locks on the market, and the choices are also quite varied. Although many people have purchased a door lock, they do not know how to install a door lock cylinder. Today we will show you how to install a door lock cylinder.



  • What should we pay attention to before using the door lock cylinder?

  • What should be paid attention to during the installation of door lock cylinder?

  • What should be paid attention to during the installation of door lock cylinder?



What should we pay attention to before using the door lock cylinder?


  1. Drilling


    First determine the installation location and drill holes. The location of the drill holes can be determined according to the installation drawing. Generally, new door locks will come with a fixed-distance template. Fix the fixed-distance template to the door edge with tape to determine the drilling position. An electric drill can be used when drilling, but the finish of the door should not be damaged, so as not to affect the aesthetics.


  2. Install the lock body


    After the drilling is completed, you can install the door lock cylinder. When installing, insert the door lock cylinder into the drilled hole and fix it with screws.



What should be paid attention to during the installation of door lock cylinder?


  1. Install the lock cylinder


    After the lock body is installed, start to install the door lock cylinder, insert the door lock cylinder into the hole of the lock cylinder, and let the door lock cylinder fit with the lock tongue to fix it.


  2. Install the panel


    The panel is divided into a front panel and a rear panel. Generally, the front panel is installed first. When installing, the door handle and the connecting rod must be installed first, and then the connecting rod should be inserted into the corresponding position in the lock body to fix it, and then the front panel will be fixed with screws. Fastened to the door. Then install the rear panel, insert the lock part of the rear panel into the lock hole, and then fix it with screws.



What should be paid attention to during the installation of door lock cylinder?


  1. Install the lock tongue


    First determine the installation position of the deadbolt piece, and then use the screw to fix the deadbolt piece to ensure that the deadbolt piece is flush with the door frame.


  2. Trial


    When the door lock cylinder is installed, it needs to be tried. During the trial, check whether the extension and recovery of the lock tongue are normal and smooth. There are three inspection methods, namely, turning the door handle, turning the anti-lock knob on the rear panel, and using a key. After confirming that it is normal, it can be officially used. If there is a problem, it needs to be adjusted in time.



With over 20 years manufacturer, Zhejiang Yige Technology Co., Ltd. we gathered a batch of skilled workers with at least 10 years. They are all top qualified workers.


Zhejiang Yige Technology Co., Ltd.
+86-0577-86806111
+86-13587653067
NO.659 Dingxiang Rd, Longwan District, Wenzhou City, Zhejiang, China, 325000
© Zhejiang Yige Technology Co., Ltd. 2021 All Rights Reserved.

CONTACT US