Publish Time: 2022-10-14 Origin: Site
The door lock body is mainly responsible for the basic anti-theft work of the anti-theft door. The lock body is responsible for opening and locking doors and windows, and plays an important role in anti-theft!
What is the difference between door lock body?
What are the common door lock body sizes on the market?
What are the installation steps of door lock body?
The size of the standard lock body is between 40mm and 60mm. The lock body is generally divided according to the size. At present, there are two main sizes, one is 6068 lock body, and the other is the overlord lock body. The lock body usually has a cylindrical lock body and a square lock body. Whether it is a cylindrical lock body or a square lock body, the size of the lock body is mostly the same. The difference is the size of the middle latch.
The size of door lock body is generally related to the model of lock body, but it is basically differentiated by size, lock cylinder model and manufacturer.
Generally, according to the size, there are two main sizes, one is the 6068 lock body, and the other is the Overlord lock body.
The door lock body is divided into 58 locks and 50 locks according to the distance from the center of the square bar hole to the center of the lock head hole.
50 lock bodies can be divided into large 50 lock bodies and small 50 lock bodies according to size.
It is distinguished according to size, lock cylinder model and manufacturer.
The door lock body is one of the components of a lock. There are many kinds of lock bodies, including unidirectional lock body, three-way lock body, four-way lock body, etc. It is generally used on anti-theft doors and is responsible for the basic anti-theft work of anti-theft doors. The lock cylinder controls the operation of the lock body. The lock body is responsible for opening and locking doors and windows, playing an important role in anti-theft.
Install the door lock body and fix the lock body with upper screws;
Install the inner and outer handle panels and lock caps, and fix the panels on both sides with two bolts on the inner side.
Change door lock body: This is troublesome. If it can't be done, it is recommended to find a professional master. First, remove the handle and lock cylinder. Remove the upper and lower screws of the main lock panel, and then the lock body can be taken out. During the main installation, pay attention to the upper and lower latches in the main lock, which is a little technical.
From raw material to each production process, Zhejiang Yige Technology Co., Ltd. use the top grade material and strict technical specification to produce accurate and perfect products.