What are the installation steps of the lock body?

The lock body is generally used on the anti-theft door and is responsible for the basic anti-theft work of the anti-theft door. The lock cylinder controls the operation of the lock body. The lock body is responsible for opening and locking the door and plays an important role in anti-theft.

• What does the 65 lock body mean?

• What is the production process of the lock body?

• What are the installation steps of the lock body?

What does the 65 lock body mean?

The 65 lock body means that the distance between the lock body and the guide sheet is 65 mm. According to the query of relevant information, the lock body is one of the components of the lock. There are many kinds of lock bodies. One way lock body, three-way lock body, four-way lock body are generally used for anti-theft doors and are responsible for the basic anti-theft work of anti-theft doors.

What is the production process of the lock body?

Production process: raw material shearing - stamping with various dies for tilting press - trimming and trimming - sanding - polishing - electroplating sealing - assembly - inspection - packaging.

Assembly process: ball lock parts and installation process: front ball lock cylinder front pass ball cover support frame (including flange, sliding plate, support frame and decorative sleeve) front gear cover switch slide block spring baffle rear pass fuse inner sleeve rear baffle rear baffle rear cover rear ball.

What are the installation steps of the lock body?

1. Drill the lock body mounting holes on the anti-theft door according to the installation dimension illustration of the anti-theft door lock body.

   
   

2. Install the anti-theft door lock body into the hole, fix the screws, install the screws and connecting screws on the outer panel parts, insert the connecting square bar into the square bar hole of the lock body, align the square hole of the handle of the outer panel parts with the connecting square bar hole, and install the outer panel parts.

   
   

3. Install the inner panel assembly and align the rear fastening screws. Insert the lock body into the lock hole of the lock body from the inside to the outside, insert the screw from the lock body panel hole to align with the thread of the lock body mounting hole, and then tighten it. Install the lock box or lock plate on the door frame.

   
   

4. After the initial installation, turn the outer handle and inner handle to observe whether the diagonal tongue can be smoothly retracted and extended. Turn the knob on the rear panel to see if the square tongue retracts smoothly. Insert the key and rotate it back and forth to see if the square tongue extends and retracts smoothly.

   
   

5. After fastening each assembly screw, repeat the action and test several times. If the action is not smooth, loosen the screw and adjust the position until the unlocking is convenient and suitable.

Zhejiang Yige Technology Co., Ltd. have our own R&D team, which can research and develop the products according to our clients’ requirements.